FAQ – Kahe Nautic

Register my product

Kahe POD 160 Instructions
Download
Kahe POD 600 Instructions
Download

POD 600 FAQ

What is the speed depending on the boats?

Use on a Zodiac-type dinghy with 4 people on board close to maximum power (keeping a power reserve if necessary): approximately 3.5 knots
Use in underwater scooter mode: approximately 7 km/h
Use on kayak or stand-up paddleboard type boats: between 8 and 12 km/h depending on the boat

What is the autonomy depending on the boats?

Use on a Zodiac-type dinghy with 4 people on board close to maximum power (keeping a power reserve if necessary): 1 hour
Use in underwater scooter mode (speed of approximately 6 to 7 km/h): 2 to 3 hours
Use on kayak or stand-up paddleboard: up to 6 hours of autonomy (more than 30 km distance with the motor)

How long does it take to charge?

220 volts (charger supplied, charges in 5 hours), 12V or 24V (optional, charges in 2 hours possible)

Does the engine float?

Yes, it floats, no risk of loss at the bottom of the water

How deep can you go in snorkeling mode?

The Kahe POD 600 can be used up to 5 meters deep (IP68 waterproof standard) in underwater scooter mode.

Can the Pod in snorkeling mode be piloted with one hand?

Yes, it is completely possible.

Is the battery integrated?

Yes the battery is integrated

Does it weigh 4.5kg including battery?

Yes, 4.5kg including battery

Can it be charged on a 12V outlet?

The KAHE POD 600 can be recharged at 220V (charger supplied), or at 12V, 24V or via solar panels (specific chargers)

Is it possible to use an external battery or solar panels?

The Kahe POD 600 can be recharged even while in use, via its charging port, up to 10 amps (approximately 250 watts). It is therefore possible to use external batteries (12V or 24V for example), and/or a solar panel, using a suitable lithium battery charger (optional)!

Does the Pod 600 fit all kayak and SUP models?

Yes, on 97% of boats on the market, instead of the daggerboard via a slider interface or US Box. If the interface is not compatible, it is possible to apply a slider patch.

POD 160 FAQ

How do I pair my remote control with my motor?

1 - Connect the battery of your Kahe Pod to be paired If you have several electrically assisted products, make sure that it is the only one nearby: the remote control must only be able to detect the product you wish to pair. 2 - Turn on the remote control by pressing the central button for 2 seconds.
3 - Start pairing mode Press the + and - buttons on the remote control simultaneously until the blue light flashes quickly
4 - It's done! Wait 30 to 60 seconds for the pairing process to complete. Once OK, the blue light will turn off. Pairing only needs to be done once. Your remote control and your Kahe POD will now always remain paired (unless you change the link channel).